Product ID:SOLDER 50/50
MSDS Date:01/01/1987
FSC:3439
NIIN:00-239-8505
MSDS Number: BDMFX

TARACORP INDUSTRIES

Emergency Phone: (919)784-8110

Cage: 84996

TARACORP INDUSTRIES IMACO PLANT

WINSTON-SALEM, NC 27108 US

Cage: 84996

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 50.0%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 50%.

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Effects of Overexposure:NAUSEA,VOMIT MIGHT OCCUR DURING SOLDERING.METAL
TASTE,LOSS OF WT,MUSC.PAIN & WEAKNESS.

First Aid:REMOVE TO FRESH AIR THESE SYMPTOMS WHEN RELATED TO THE FLUX
ARE ARE USUALLY TRANSIENT.IF SYMPTOMS PERSIST SEE A PHYSICIAN/EYE
CONTACT:FLUSH W/WTR.;EYE/SKIN:IF MOLTEN REAT AS
BURN;INGEST:WTR,,TREAT AS BURN;INGEST:WTR,VOMIT.SEE DOCTOR.

Extinguishing Media:EXTINGUISH WITH AGENT SUITABLE FOR SURROUNDING FIRE
Fire Fighting Procedures:IN VERY HIGH TEMP.FIRE(2000F)SCBA MUST BE
USED.
Unusual Fire/Explosion Hazard:MODERATE FIRE/EXPLOSION HAZARD IN THE
FORM OF DUST WHEN EXPOSED TO FLAME.

Spill Release Procedures:PICK-UP & RE-USE.FINE DUST SHOULD BE SWEPT
GENTLY & VACUUMED FOR PROPER DISPOSAL.DRIPPINGS FROM SOLDERING &
WASTE SHOULD BE KEPT IN A STORAGE AREA FOR PROPER DISPOSAL.

Handling and Storage Precautions:STORE AWAY FR ACIDS & OXID MATLS
STORE IN COOL,DRY,WELL VENT,FIRE PROOF AREA. PROT CONTRS FR PHYS
DAMAGE.KEEP CONTRS CLOSED. REM, WASH CONT CLTHG.
Other Precautions:A GOOD VENTILATION IS A MUST DURING SOLDERING
PROCESSES TO KEEP THE TOXIC FUMES BELOW THE MAXIMUM ALLOWED.NO
SMOKING/EATING WHILE HANDLING MTL

Respiratory Protection:NIOSH APPVD RESPIRATOR IF TLV IS EXCEEDED
Ventilation:LOCAL EXHAUST WHEN SOLDERING
Protective Gloves:HEAT PROTECTIVE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:WEAR FULL PROTECTIVE CLOTHING.
Supplemental Safety and Health
UNDATED MSDS

HCC:N1
Boiling Pt:B.P. Text:3140,1727C
Spec Gravity:8.912
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SILVER-GRAY SOLID.NO ODOR.

Stability Indicator/Materials to Avoid:YES
TIN:CHLORINE,TURPENTINE;LEAD:STRG OXID.,HYD.PEROS,SOD,POT.
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:NONE SPECIFIED.

Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE & FED REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.